No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Generation and Detection of Alarms and Performance Events in the SDH Lower Order Signal Flow

Generation and Detection of Alarms and Performance Events in the SDH Lower Order Signal Flow

PDH services include services at rates 1.5 Mbit/s, 2 Mbit/s, 34 Mbit/s, and 140 Mbit/s. PDH services at different rates use different path overhead bytes. Therefore, the alarm signal generation modes vary accordingly. This section describes the signal flow and the procedure to handle each overhead byte by each module.

NOTE:

This section uses E1, E3, and E4 signal sequences as examples.

This section describes the E1 signal flow processing and alarm generation processes between PDH ports and the cross-connect unit.

Figure 1-4 shows the alarm signal flow.

Figure 1-4  Generation of alarms between E1 ports and the cross-connect unit

As shown in Figure 1-4, the lower order part is divided into the following functional modules by overhead byte processing characteristics:
  • Higher order path adaptation (HPA)
  • Lower order path termination (LPT)
  • Lower order path adaptation (LPA)
  • PDH physical interface (PPI)
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75844

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next