No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inter-board Alarm Suppression

Inter-board Alarm Suppression

The inter-board alarm suppression means that, when services are configured between two boards on the same NE, the service alarm generated by the source board suppresses the service alarm generated by the sink board. The equipment supports the alarm suppression between a line board and a tributary board, and between a line board and a data board.

Figure 1-8 shows the inter-board suppression relationships among common alarms.

Figure 1-8  Inter-board alarm suppression relationships

If an alarm above the arrow is generated at the service source, and the alarm below the arrow is generated at the service sink, the alarm above the arrow suppresses the alarm below the arrow. In this case, you can focus on the alarms at the service source during troubleshooting.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75438

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next