No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BDID_ERROR

BDID_ERROR

Description

The BDID_ERROR alarm indicates that errors occur in slot verification.

Attribute

Alarm Severity Alarm Type

Major

Processing alarm

Parameters

None.

Impact on the System

  • The alarmed board may fail to get online and services on the board are interrupted.
  • You cannot configure and monitor the services on the board.

Possible Causes

Possible causes of the BDID_ERROR alarm are as follows:

  • The board is not inserted tightly.
  • The backplane has bent pins.
  • The board has hardware faults.

Procedure

  1. View the BDID_ERROR alarm on the NMS to confirm the alarmed board.
  2. Check whether the board is inserted tightly.

    If... Then...
    The board is not inserted tightly Reseat the board and check whether the alarm is cleared. If the alarm persists, go to the next step.
    The board is inserted tightly Go to the next step.

  3. Remove the board to check whether the backplane has bent pins.

    If... Then...
    The backplane has bent pins Fix these bent pins and then insert the board. Check whether the alarm is cleared. If the alarm persists, go to the next step.
    The backplane does not have bent pins Go to the next step.

  4. Check whether the board is functioning properly.

    If... Then...
    The board is malfunctioning Reset (cold) the board or replace it.
    The board is functioning properly Contact Huawei technical support engineers to handle the alarm.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75850

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next