No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Related Versions

The following table lists the product versions related to this document.

Product Name Version
OptiX OSN 500 V100R008C50
OptiX OSN 550 V100R008C50
OptiX OSN 580 V100R008C50
iManager U2000 V200R018C50

Intended Audience

This document describes the features and functions of the OptiX OSN equipment. To be more specific, this document describes the basic concepts, availability, realization principle, application, configuration, and troubleshooting of these features and functions.

This document is intended for:

  • Installation and commissioning engineer
  • Data configuration engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury.

Provides a tip that may help you solve a problem or save time.

Provides additional information to emphasize or supplement important points in the main text.

GUI Conventions

The GUI conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK.

>

Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder.

Updates in Issue 02 (2019-01-03) Based on Product Version V100R008C50

This document is the second issue for product version V100R008C50. Compared with the 01 issue, this issue includes the following updates:

  • In "Configuring Services on a Smart Line Board" of Configuration Guide (Packet Transport Domain), upgraded the "Configuring Virtual Interfaces and Mapping on a Per-NE Basis".

Updates in Issue 01 (2018-04-30) Based on Product Version V100R008C50

This document is the first issue for product version V100R008C50. Compared with the latest issue for V100R008C30, this issue includes the following updates in V100R008C50:

  • In the Commissioning Guide, added "Testing Dry Contact Services" for OptiX OSN 580 and OptiX OSN 550.
  • In the Configuration Guide (SDH Transport Domain), added the configuration example "onfiguring Dry Contact Signal Transmission" for OptiX OSN 580 and OptiX OSN 550.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 25735

Downloads: 211

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next