No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Clocks, Services, and Protection

Configuring Clocks, Services, and Protection

Use the U2000 to configure clocks, services, and protection based on engineering documentation to prepare for subsequent equipment commissioning.

Prerequisites

  • You are an NM user with Administrators rights or higher.
  • The connections of networkwide optical fibers are checked.
  • The connections of NMS computer are checked.

Tools, Equipment, and Materials

U2000

Procedure

  1. The below table lists the configuration process. For details on the configuration, see the Configuration Guide.

    Table 1-7  Configuration process of OptiX OSN 550
    Mode Configuration Task Description
    TDM mode Configuring physical layer clocks This task describes how to configure physical layer clocks on the U2000. For details, see Configuring Clocks.
    Configuring linear MSP This task describes how to configure linear MSP on the U2000. For details, see Linear MSP.
    Configuring ring MSP This task describes how to configure ring MSP on the U2000. For details, see Ring MSP.
    Packet mode Configuring synchronous Ethernet clocks This task describes how to configure synchronous Ethernet clocks on the U2000. For details, see Configuring Synchronous Ethernet Clocks.
    Configuring Native Ethernet services This task describes how to configure Native Ethernet services on the U2000. For details, see Configuring Native Ethernet Services on the Packet Plane.
    Configuring ETH PWE3 services This task describes how to configure ETH PWE3 services on the U2000. For details, see Configuring ETH PWE3 Services.
    Configuring CES services This task describes how to configure CES services on the U2000. For details, see Configuring CES services.
    Configuring CES ACR This task describes how to configure CES ACR on the U2000. For details, see Configuring CES ACR.
    Configuring ATM services This task describes how to configure ATM services on the U2000. For details, see Configuring ATM services.
    Configuring MPLS tunnel APS protection This task describes how to configure MPLS tunnel APS protection on the U2000. For details, see Configuring Tunnel APS.
    Configuring MPLS PW APS protection This task describes how to configure MPLS PW APS protection on the U2000. For details, see Configuring PW APS.
    Table 1-8  Configuration process of OptiX OSN 500
    Mode Configuration Task Description
    Packet mode Configuring synchronous Ethernet clocks This task describes how to configure synchronous Ethernet clocks on the U2000. For details, see Configuring Synchronous Ethernet Clocks.
    Configuring Native Ethernet services This task describes how to configure Native Ethernet services on the U2000. For details, see Configuring Native Ethernet Services on the Packet Plane.
    Configuring ETH PWE3 services This task describes how to configure ETH PWE3 services on the U2000. For details, see Configuring ETH PWE3 Services.
    Configuring CES services This task describes how to configure CES services on the U2000. For details, see Configuring CES services.
    Configuring CES ACR This task describes how to configure CES ACR on the U2000. For details, see Configuring CES ACR.
    Configuring ATM services This task describes how to configure ATM services on the U2000. For details, see Configuring ATM services.
    Configuring MPLS tunnel APS protection This task describes how to configure MPLS tunnel APS protection on the U2000. For details, see Configuring Tunnel APS.
    Configuring MPLS PW APS protection This task describes how to configure MPLS PW APS protection on the U2000. For details, see Configuring PW APS.
    Table 1-9  Configuration process of OptiX OSN 580
    Mode Configuration Task Description
    TDM mode Configuring physical layer clocks This task describes how to configure physical layer clocks on the U2000. For details, see Configuring Clocks.
    Configuring linear MSP This task describes how to configure linear MSP on the U2000. For details, see Linear MSP.
    Configuring ring MSP This task describes how to configure ring MSP on the U2000. For details, see Ring MSP.
    Packet mode Configuring synchronous Ethernet clocks This task describes how to configure synchronous Ethernet clocks on the U2000. For details, see Configuring Synchronous Ethernet Clocks.
    Configuring Native Ethernet services This task describes how to configure Native Ethernet services on the U2000. For details, see Configuring Native Ethernet Services on the Packet Plane.
    Configuring ETH PWE3 services This task describes how to configure ETH PWE3 services on the U2000. For details, see Configuring ETH PWE3 Services.
    Configuring MPLS tunnel APS protection This task describes how to configure MPLS tunnel APS protection on the U2000. For details, see Configuring Tunnel APS.
    Configuring MPLS PW APS protection This task describes how to configure MPLS PW APS protection on the U2000. For details, see Configuring PW APS.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46864

Downloads: 388

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next