No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing PWE3 Services

Managing PWE3 Services

Quality of PWE3 services has significant impacts on customer revenues; stable PWE3 services increase customer revenues. Therefore, it is crucial to properly manage PWE3 services. Managing PWE3 services involves deploying, modifying, and deleting PWE3 services, checking the PWE3 service topology, and managing discrete PWE3 services.

Checking the PWE3 Service Topology

Quality of PWE3 services has significant impacts on customer revenues; stable PWE3 services increase customer revenues. This section describes how to check the topology information and running status of a PWE3 service, facilitating PWE3 service management.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions; for example, set Protocol Type to PW APS Protection. Then, click Filter. Query all PWE3 services that meet the filter conditions.
  3. Select the PWE3 service whose topology information you need to check and click the Topology tab.
  4. In the PWE3 service topology view, right-click an NE, and choose View Real-Time Performance from the shortcut menu to check the real-time running status of the PWE3 service.

Deploying PWE3 Services

After being created on the NMS, PWE3 services are stored on the NMS but not immediately deployed to the corresponding NEs. This section describes how to deploy PWE3 services from the NMS to the corresponding NEs.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set Deployment Status to Undeployed. Click Filter to check all undeployed PWE3 services.
  3. Select one or more PWE3 services to be deployed, right-click the PWE3 services, and choose Deploy and Enable > Deploy from the shortcut menu.



    NOTE:
    After a PWE3 service is successfully deployed, its Deployment Status is Deployed.

Modifying PWE3 Services

This section describes how to change values of PWE3 service parameters, such as the service name.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Context

Modifying a PWE3 service may interrupt other services.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions; for example, set Protocol Type to PW APS Protection. Then, click Filter. Query all PWE3 services that meet the filter conditions.
  3. Select the desired PWE3 service and click the tab in the lower left corner of the interface. Then, modify the parameters.

  4. Optional: If only the basic attributes of the PWE3 service need to be modified, select the PWE3 service whose parameters you need to modify and click Details. In the dialog box that is displayed, change the values of the PWE3 services parameters as required.



Deleting PWE3 Services

After being deployed, PWE3 services are stored on the NMS and the corresponding NEs. This section describes how to delete PWE3 services from the NMS and corresponding NEs.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions; for example, set Protocol Type to PW APS Protection. Then, click Filter. Query all PWE3 services that meet the filter conditions.
  3. Select one or more PWE3 services that you need to delete, right-click the services, and choose Delete Service > Delete from the shortcut menu.



Deleting PWE3 Services from the Network Side

After being deployed, PWE3 services are stored on the NMS and the corresponding NEs. After being deleted from the network side, PWE3 services are deleted from the NMS only but still stored on the corresponding NEs. In addition, after being deleted from the network side, PWE3 services are displayed as discrete services on the NMS.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions; for example, set Protocol Type to PW APS Protection. Then, click Filter. Query all PWE3 services that meet the filter conditions.
  3. Select one or more PWE3 services that you need to delete, right-click the services, and choose Delete Service > Delete from Network Side from the shortcut menu.



Deleting PWE3 Services from the NE Side

After being deployed, PWE3 services are stored on the NMS and the corresponding NEs. After being deleted from the NE side, PWE3 services are deleted from the corresponding NEs only but still stored on the NMS. In addition, after being deleted from the NE side, PWE3 services are displayed as undeployed.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions; for example, set Protocol Type to PW APS Protection. Then, click Filter. Query all PWE3 services that meet the filter conditions.
  3. Select one or more PWE3 services that you need to delete, right-click the services, and choose Deploy and Enable > Undeploy from the shortcut menu.



    NOTE:
    After a PWE3 service is successfully deleted from the NE side, its Deployment Status is Undeployed.

Managing Discrete PWE3 Services

This section describes how to find discrete PWE3 services, convert discrete PWE3 services to unterminated services, and delete discrete PWE3 services.

Prerequisites

  • The PWE3 service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > PWE3 Service > Manage PWE3 Discrete Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions and click Filter. Query all PWE3 services that meet the filter conditions.
  3. Optional: Convert a PWE3 service to an unterminated service.
    1. Select a PWE3 service and click Convert to Unterminated.
    2. In the dialog box that is displayed, set attributes of the PWE3 service, such as the service name.

      NOTE:
      After a PWE3 service is converted to an unterminated service, its service information is displayed in Manage PWE3 Service.

  4. Optional: Select one or more PWE3 services and click Delete Discrete Service.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45370

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next