No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing Composite Services

Managing Composite Services

Managing composite services includes automatically discovering and deploying composite services.

Automatically Discovering Composite Services

With the automatically discovering composite service function, you can discover composite services and save them to the NMS. The composite service is composed of services associated with interface connection points or PW connection points.

Prerequisites

You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > Composite Service > Search for Composite Service from the Main Menu.
  2. In the dialog box that is displayed, set the tunnel discovery policy and click Start.



  3. After the composite service search is complete, click Close.

Deploying Composite Services

After being created on the NMS, Composite services are stored on the NMS but not immediately deployed to the corresponding NEs. This section describes how to deploy Composite services from the NMS to the corresponding NEs.

Prerequisites

  • The composite service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > Composite Service > Manage Composite Service from the main menu.
  2. In the dialog box that is displayed, set Deployment Statusto Undeployed. Click Filter to check all undeployed Composite services.
  3. Select one or more Composite services to be deployed, right-click the Composite services, and choose Deploy from the shortcut menu.



    NOTE:
    After a Composite service is successfully deployed, its Deployment Status is Deployed.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 51117

Downloads: 415

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next