No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating NEs, Optical Fibers, and Topology Subnets

Creating NEs, Optical Fibers, and Topology Subnets

Network services and protection schemes can be configured only after NEs, optical fibers, and topology subnets are created.

Item Procedure  
Creating NEs Searching for and Creating NEs

-

Creating NEs Manually
Configuring the NE Data Manually
Uploading the NE Data
Creating optical fibers

Creating SDH Optical Fibers by Searching for the SDH Optical Fibers on the NMS

Creating Ethernet Cables in the Packet Domain by Searching for the Cables on the NMS

It is recommended that you use the Search function to create fibers/cables.

You can also manually create fibers/cables when the new fibers/cables are few and the fibers/cables are clearly planned and correctly physically connected.

Manually Creating Fibers/Cables

Creating and Managing Virtual Fibers

Creating a Virtual Link on a Smart Line Board

Creating and Managing Layer 2 Links
Creating topology subnets Creating a Topology Subnet

-

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 50024

Downloads: 409

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next