No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Transit Nodes for Ethernet Services

Configuring Transit Nodes for Ethernet Services

On a live data network, an Ethernet service is added to its source NE, passed through on its transit NEs, and dropped from its sink NE. This section describes how to configure transit NEs for an Ethernet service.

Configuring Transit NEs for Ethernet Services Carried by Ports

On a live data network, an Ethernet service is added to its source NE, passed through on its transit NEs, and dropped from its sink NE. This section describes how to configure transit NEs for an Ethernet service carried by ports.

Prerequisites

  • For the Ethernet service carried by ports, Port Mode is set to Later 2 and Encapsulation Type is set to 802.1Q.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. In the NE Explorer, select the required NE from the root list, and choose Configuration > Packet Configuration > Ethernet Service Management > E-Line Service from the Function Tree.
  2. Click New. Then, the New E-Line Service dialog box is displayed.

  3. Set parameters of transit NEs for an Ethernet service. For details about the parameters, see E-Line Service Parameters.

    NOTE:
    • For transit NEs for an Ethernet service, set Direction to UNI-UNI.
    • For transit NEs for an Ethernet service, you do not need to set QoS parameters.

  4. Click OK.
  5. Click Query to check the configured Ethernet service.

Configuring Transit NEs for Ethernet Services Carried by PWs

On a live data network, an Ethernet service is added to its source NE, passed through on its transit NEs, and dropped from its sink NE. This section describes how to configure transit NEs for an Ethernet service carried by PWs.

Background Information
For transit NEs of an Ethernet service carried by PWs, you only need to configure MPLS tunnels whose Node Type is Transit. For details on how to configure an MPLS tunnel, see Configuring an MPLS Tunnel.

Configuring Transit NEs for Ethernet Services Carried by QinQ Links

On a live data network, an Ethernet service is added to its source NE, passed through on its transit NEs, and dropped from its sink NE. This section describes how to configure transit NEs for an Ethernet service carried by QinQ links.

Prerequisites

  • For the Ethernet service carried by QinQ links, Port Mode is set to Later 2 and Encapsulation Type is set to QinQ.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. In the NE Explorer, select the required NE from the root list, and choose Configuration > Packet Configuration > Ethernet Service Management > E-Line Service from the Function Tree.
  2. Click New. Then, the New E-Line Service dialog box is displayed.

  3. Set parameters of transit NEs for an Ethernet service. For details about the parameters, see E-Line Service Parameters.

    NOTE:
    • For transit NEs for an Ethernet service, set Direction to UNI-UNI.
    • For transit NEs for an Ethernet service, you do not need to set QoS parameters.

  4. Click OK.
  5. Click Query to check the configured Ethernet service.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46176

Downloads: 383

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next