No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing the MAC Address Table

Managing the MAC Address Table

The MAC address table is the core of the E-LAN service. The OptiX OSN equipment provides various functions for managing the MAC address table.

Creating a Static MAC Address Entry

Through the creation of a static MAC address entry, the host with a specified MAC address is not affected by MAC address aging. In addition, the E-LAN service can be supported by the host that receives packets only.

Prerequisites

  • The E-LAN service must be created.
  • You are an NM user with Operator Group rights or higher.
Tools, Equipment, and Materials

U2000

Procedure

  1. Select the NE from the Object Tree in the NE Explorer. Choose Configuration > Packet Configuration > Ethernet Service Management > E-LAN Service from the Function Tree.
  2. On the main interface, select the E-LAN service whose static MAC address entry needs to be created.
  3. Click the Static MAC Address tab.
  4. Click New.
    The New Static MAC Address dialog box is displayed.
  5. Configure the parameters of the static MAC address entry.



  6. Click OK, and then close the dialog box that is displayed.

Creating a Blacklist Entry of MAC Addresses

Through the creation of a blacklist entry of MAC addresses, the host with a specified MAC address can be prohibited from using the E-LAN service.

Prerequisites

  • The E-LAN service must be created.
  • You are an NM user with Operator Group rights or higher.
Tools, Equipment, and Materials

U2000

Procedure

  1. Select the NE from the Object Tree in the NE Explorer. Choose Configuration > Packet Configuration > Ethernet Service Management > E-LAN Service from the Function Tree.
  2. On the main interface, select the E-LAN service whose blacklist entry of MAC addresses needs to be created.
  3. Click the Disabled MAC Address tab.
  4. Click New.
    The Create Disabled MAC Address dialog box is displayed.
  5. Configure the blacklist entry of MAC addresses.



  6. Click OK, and then close the dialog box that is displayed.

Configuring the Aging Parameters of a MAC Address Table

By default, the aging function of a MAC address table is enabled and the aging time is five minutes. By configuring the aging parameters of a MAC address table, you can modify such parameters.

Prerequisites

  • The E-LAN service must be created.
  • You are an NM user with Operator Group rights or higher.
Tools, Equipment, and Materials

U2000

Procedure

  1. Select the NE from the Object Tree in the NE Explorer. Choose Configuration > Packet Configuration > Ethernet Service Management > E-LAN Service from the Function Tree.
  2. On the main interface, select the E-LAN service whose aging parameters of the MAC address table need to be configured.
  3. Click the MAC Address Learning Parameters tab.
  4. Configure the status of the aging function and set the aging time.



  5. Click Apply, and then close the dialog box that is displayed.

Querying or Deleting a Dynamic MAC Address

By querying or deleting a dynamic MAC address, you can query or delete all the MAC address entries that are learned by the E-LAN service.

Prerequisites

  • The E-LAN service must be created.
  • You are an NM user with Operator Group rights or higher.
Tools, Equipment, and Materials

U2000

Procedure

  1. Select the NE from the Object Tree in the NE Explorer. Choose Configuration > Packet Configuration > Ethernet Service Management > E-LAN Service from the Function Tree.
  2. On the main interface, select the E-LAN service whose dynamic MAC address needs to be queried or cleared.
  3. Click the Self-Learning MAC Address tab.
  4. Optional: Select the board whose dynamic MAC address needs to be queried and then check the dynamic MAC addresses in the MAC address table that is displayed.
  5. Optional: Click Clear MAC Address to clear the dynamic MAC addresses. Then, click OK in the dialog box that is displayed for confirmation.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45628

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next