No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing VPLS Services

Managing VPLS Services

Quality of VPLS services has significant impacts on customer revenues; stable VPLS services increase customer revenues. Therefore, it is crucial to properly manage VPLS services. Managing VPLS services involves deploying, modifying, and deleting VPLS services, checking the VPLS service topology.

Checking the VPLS Service Topology

Quality of VPLS services has significant impacts on customer revenues; stable VPLS services increase customer revenues. This section describes how to check the topology information and running status of a VPLS service, facilitating VPLS service management.

Prerequisites

  • A VPLS service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > VPLS Service > Manage VPLS Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions. Then, click Filter. Query all VPLS services that meet the filter conditions.
  3. Select the VPLS service whose topology information you need to check and click the Topology tab.

  4. In the service topology view, right-click an NE, a port or a PW. Then you can query current alarms, historical alarms or real-time performance data by choosing the related item from the shortcut menu.

Deploying VPLS Services

After being created on the NMS, VPLS services are stored on the NMS but not immediately deployed to the corresponding NEs. This section describes how to deploy VPLS services from the NMS to the corresponding NEs.

Prerequisites

  • A VPLS service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > VPLS Service > Manage VPLS Service from the main menu.
  2. In the dialog box that is displayed, set Deployment Status to Undeployed. Click Filter to check all undeployed VPLS services.
  3. Select one or more VPLS services to be deployed, right-click the VPLS services, and choose Deploy and Enable > Deploy from the shortcut menu.



    NOTE:
    After a VPLS service is successfully deployed, its Deployment Status is Deployed.

Modifying VPLS Services

This section describes how to change values of VPLS service parameters, such as the service name.

Prerequisites

  • A VPLS service has been created.
  • You are an NM user with Administrators rights or higher.

Context

Modifying a VPLS service may interrupt other services.

Procedure

  1. Choose Service > VPLS Service > Manage VPLS Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions. Then, click Filter. Query all VPLS services that meet the filter conditions.
  3. Select the desired VPLS service and click the tab in the lower left corner of the interface. Then, modify the parameters.

  4. Optional: If only the basic attributes of the VPLS service need to be modified, select the VPLS service whose parameters you need to modify and click Details. In the dialog box that is displayed, change the values of the VPLS services parameters as required.



Deleting VPLS Services

After being deployed, VPLS services are stored on the NMS and the corresponding NEs. This section describes how to delete VPLS services from the NMS and corresponding NEs.

Prerequisites

  • A VPLS service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > VPLS Service > Manage VPLS Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions. Then, click Filter. Query all VPLS services that meet the filter conditions.
  3. Select one or more VPLS services that you need to delete, right-click the services, and choose Delete Service > Delete from the shortcut menu.



Deleting VPLS Services from the Network Side

After being deployed, VPLS services are stored on the NMS and the corresponding NEs. After being deleted from the network side, VPLS services are deleted from the NMS only but still stored on the corresponding NEs. In addition, after being deleted from the network side, VPLS services are displayed as discrete services on the NMS.

Prerequisites

  • A VPLS service has been created.
  • You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > VPLS Service > Manage VPLS Service from the main menu.
  2. In the dialog box that is displayed, set filter conditions. Then, click Filter. Query all VPLS services that meet the filter conditions.
  3. Select one or more VPLS services that you need to delete, right-click the services, and choose Delete Service > Delete from Network Side from the shortcut menu.



Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45665

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next