No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Fiber Configuration Data

Modifying the Fiber Configuration Data

You can modify the existing fiber configuration data.

Changing Fiber/Cable Information

You can change the name, attenuation, length, and type of a fiber/cable according to its connection status and physical features.

Prerequisites

You are an NM user with Maintenance Group rights or higher.

Procedure

  1. Choose Inventory > Fiber/Cable > Fiber/Cable Management from the Main Menu. All the fiber information is displayed in the right pane.
  2. Select a fiber, right-click and choose Modify Fiber/Cable from the shortcut menu. In the Modify Fiber/Cable dialog box, you can modify Name, Length(km), Attenuation, Medium Type, Maintainer, Remarks, and Disabled Status. Click OK. Then, click Close in the Operation Result dialog box indicating that the operation succeeded.

Deleting Fibers

If you need to delete an NE or change the links between NEs during network adjustment, delete the related fiber connections between the NEs.

Prerequisites

You are an NM user with Maintenance Group rights or higher.

Procedure

  1. Choose Inventory > Fiber/Cable > Fiber/Cable Management from the Main Menu.
  2. Right-click the fiber you need to delete and then choose Delete Fiber/Cable from the shortcut menu. Then, the Warning dialog box is displayed. Click OK to delete the fiber.
  3. Click Close in the Operation Result dialog box indicating that the operation succeeded.

Deleting DCN Communication Cables

In certain scenarios such as network adjustment, you can delete the DCN communication cable that is not applicable.

Prerequisites

You are an NM user with Operator Group rights or higher.

Procedure

  1. On the Main Topology, right-click the cable and choose Delete from the shortcut menu.
  2. Click Yes in the Confirm dialog box that is displayed.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 57702

Downloads: 487

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next