No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NE-Level TPID

Configuring NE-Level TPID

When PW-carried Ethernet services use the request VLAN function, the request VLAN tags added to the services must contain the same TPID so that the services can run properly.

Prerequisites

You are an NM user with Administrators rights or higher.

Procedure

  1. In NE Explorer, select the desired NE and choose Configuration > Packet Configuration > TPID Configuration from the navigation tree.
  2. Set TPID(Hexadecimal).
  3. Click Apply.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45387

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next