No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NE Performance Monitoring

Enabling NE Performance Monitoring

This section describes how to enable and disable the performance monitoring function on the U2000. The performance parameters are used to monitor the equipment, monitor the running status of the services, and analyze the network.


Tools, Equipment and Materials




In normal cases, all the performance parameters are set to the default values. You only need to enable the performance monitoring function. You can also set the performance parameters depending on the actual situations.


  1. Choose Performance > Set NE Performance Monitoring Time from the Main Menu.
  2. Select an NE and click .
  3. Select one or more NEs and set the 15-minute and 24-hour performance monitoring parameters according to the requirements.

    • The start time must be later than the current time of the U2000 and the end time must be later than the start time.
    • If the end time is not set, it indicates that performance monitoring starts from the start time and does not stop.

  4. Click Apply. A dialog box is displayed indicating that the operation is successful. Click Close.
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 49443

Downloads: 407

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next