No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing NE IDs

Changing NE IDs

After logging in to an NE through the U2000, change the NE ID according to the plan of the actual NE ID.


  • The NE must be created.
  • You are an NM user with Maintenance Group rights or higher.


Changing the NE ID briefly interrupts the NE communication.


Before the equipment is delivered out of factory, the default NE ID is generated and is a unique NE ID. Obtain the default NE ID by performing the NE search function on the U2000.


  1. In the Main Topology, select an NE that needs to change its ID, right-click it, and then choose NE Explorer.
  2. Choose Configuration > NE Attribute from the Function Tree.
  3. Click Modify NE ID. Then, the Modify NE ID dialog box is displayed.

  4. Enter New ID and New Extended ID. Then, click OK.
  5. Click OK in the Warning dialog box that is displayed.
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46952

Downloads: 388

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next