No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VLAN Unicast

Configuring VLAN Unicast

You can set the packets with the specific MAC address to be forwarded through the specified port in the specified VLAN by configuring VLAN unicast.


  1. In the NE Explorer, select an Ethernet board and choose Configuration > Ethernet Service > Ethernet LAN Service from the Function Tree. Click the VLAN Unicast tab.
  2. Click New. Then, the Create VLAN Unicast dialog box is displayed. Set VLAN ID, MAC Address, and Physical Port.

    The first byte of MAC Address of the VLAN unicast must be an even number.

  3. Click OK. Click Close in the Operation Result dialog box that is displayed.
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45632

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next