No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling an MAC Address

Disabling an MAC Address

The port whose MAC address is disabled cannot receive any data frames.

Precautions

This operation may interrupt the service.

Procedure

  1. In the NE Explorer, select an Ethernet board and choose Configuration > Ethernet Service > Ethernet LAN Service from the Function Tree. Click the Disable MAC Address tab.
  2. Click New. Then, the Disable MAC Address Creation dialog box is displayed. Set VLAN ID and MAC Address.

    NOTE:
    The first byte of the VLAN unicast MAC Address must be an even number.

  3. Click OK and then click Close in the Operation Result dialog box that is displayed.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46645

Downloads: 387

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next