No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Signal Flow and Timeslot Allocation

Signal Flow and Timeslot Allocation

The F1 data services are accessed through the F1 data port of the auxiliary interface board. The F1 byte provides the client with a channel for transparently transmitting a 64 kbit/s service, therefore implementing end-to-end service transmission.

The F1 services are added to or dropped from NE1 and NE3 and are passed through NE2. Table 2-201 lists the data channels of each NE that need to be configured according to the service requirements.
Table 2-201  NE parameters of the F1 data services
NE Data Channel 1 Data Channel 2
NE1 F1 1-SL1D-1
NE2 2-SL1D-1 1-SL1D-1
NE3 2-SL1D-1 F1
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46112

Downloads: 383

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next