No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Clock Trace Status

Querying the Clock Trace Status

Correct clock trace relations are critical to the clock synchronization within the entire network. You can learn about and monitor the clock trace status of each NE by using the U2000.

Prerequisites

You are an NM user with Guests rights or higher.

Procedure

  1. Choose View > Main Topology from the Main Topology.
  2. Choose Clock View in the Current View drop-down list.
  3. Right-click in Clock View and choose Search Clock Link from the shortcut menu.
  4. In the Search Clock Link dialog box, click OK.
  5. If the clock trace relation changes, the Prompt dialog box is displayed, asking you whether to refresh the clock trace relation. Click Yes. When the search for the clock trace relation is complete, Clock View displays the refreshed clock trace status.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 50017

Downloads: 409

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next