No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating Ethernet LAN Services

Creating Ethernet LAN Services

When an Ethernet switching board carries LAN services, you need to create the bridge and set the attributes of the bridge and the port mounted to the bridge.

Prerequisites

You are an NM user with Operator Group rights or higher.

Procedure

  1. In the NE Explorer, select the Ethernet board and choose Configuration > Ethernet Service > Ethernet LAN Service from the Function Tree.
  2. Click New.

    The Create Ethernet LAN Service dialog box is displayed.

  3. Set the attributes of the bridge.



  4. Configure service mounting relations.
    Option Description
    Configure the services that are mounted to the IEEE 802.1d or IEEE 802.1q bridge. Proceed to 5.
    Configure the services that are mounted to the IEEE 802.1ad bridge. Go to 6.
  5. Optional: Configure the services that are mounted to the IEEE 802.1d or IEEE 802.1q bridge.
    1. Click Configure Mount.
    2. Select Available Mounted Ports and click .
    3. Optional: Repeat 5.b and select the other ports to be mounted.



    4. Click OK.



  6. Optional: Configure the services that are mounted to the IEEE 802.1ad bridge.
    1. Click Configure Mount.
    2. Set the parameters for configuring the mounted services.



    3. Click Add Mount Port.
    4. Repeat 6.b to 6.c to add the other mount ports.
    5. Click OK.
  7. Set the VC paths to be bound with the internal ports.
    1. Click Configuration.

      The Bound Path Configuration dialog box is displayed.

    2. In Configurable Ports, select a VCTRUNK as the port to be configured.
    3. In Available Bound Paths, set Level and Direction of the bound paths.
    4. Select the required items in Available Resources and Available Timeslots and click .
    5. Repeat 7.b to 7.d and bind other VC paths.
    6. Click OK.

      NOTE:

      The timeslots of the paths bound with the VCTRUNKs on the Ethernet board must be consistent with the timeslots on the line board.



Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45354

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next