No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the NE Name, Date, and Time

Setting the NE Name, Date, and Time

You can use U2000 to set the NE name, date, and time to ensure that the recorded and reported alarms and performance events on the U2000 are correct.


  • You are an NM user with Operator Group rights or higher.
  • The U2000 is started and you log in to the NE.
  • The time zone has been set for the NE to ensure that the time on the NE is consistent with that on the NMS.

Tools, Equipment, and Materials




Synchronizing the NE time does not affect services. Before synchronizing the NE time, ensure that the time of the computer where the U2000 server is installed is correct. If the time of the computer needs to be changed, log out of the U2000 and reset the time. Then, restart the U2000.


  1. In the NE Explorer, choose Configuration from the Function Tree.
  2. Change the NE name in NE Attributes. Then, click Apply.


    It is recommended that you set the NE name in the format: NE ID-Name, for example, 1-Beijing.

  3. In the displayed Operation Result dialog box, click Close.
  4. Choose Configuration > NE Time Synchronization from the Function Tree. Then, click Query to display the current NE time information.
  5. Right-click the NE time below NE Current Time, and choose Synchronize with NM Time from the shortcut menu.

    • To enable the NE to synchronize its time with the U2000 server, set Synchronous Mode to NM.
    • If the NE need not synchronize its time with other servers or NEs, set Synchronous Mode to NULL.
    • If the NE needs to synchronize its time with the NTP server and the required time accuracy reaches 500 ms, set Synchronous Mode to Standard NTP.
    • If the NE is an NTP client, the NTP server can only connect to the NE based on IP protocols.

  6. In the displayed Time Synchronization Operation dialog box, click Yes.
  7. In the displayed Operation Result dialog box, click Close.
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 46816

Downloads: 388

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next