No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Topology Subnet

Creating a Topology Subnet

To facilitate network management, you can assign the topology objects in the same network area or with similar attributes into the same topology subnet.

Prerequisites

You must be an NM user with "NM operator" authority or higher.

Background Information

A topology subnet is created only to simplify the user interface and does not affect the operation of the NEs.

Procedure

  1. Right-click in the blank area of the Main Topology and choose New > Subnet from the shortcut menu.
  2. Click the Property tab in the Create Physical Subnet dialog box. Set the attributes of the subnet.
  3. Click the Select Objects tab. Select the created NEs or subnet from the Available Objects column. Click to add the selected objects to the Selected Objects column. 

    NOTE:
    The information about the signs in a similar dialog box for selecting objects is provided as follows:
    • indicates adding the selected objects from the left column to the right column.
    • indicates adding all the objects from the left column to the right column.

  4. Click OK.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 57830

Downloads: 487

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next