No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Commissioning and Configuration Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Composite Service

Configuring a Composite Service

This section describes how to configure the basic attributes, service components, and connection points for a composite service.

Prerequisites

You are an NM user with Administrators rights or higher.

Procedure

  1. Choose Service > Composite Service > Create Composite Service from the main menu.
  2. Set parameters in the General area.



    NOTE:

    Set Creation Type to Customize.

  3. Optional: Select Parameter Linkage.

    NOTE:

    You can select Parameter Linkage when creating an EPL+PWE3 composite service to simplify the creation process.

  4. In the Service Component area, select the required service type from Select. Select one or more desired services from the displayed dialog box and click Select. The selected services are displayed in the Service Component area and service topology.



    NOTE:

    You may click Create to create services that are not listed.

  5. In the Connection Point area, configure the connection points. The configured connection points are displayed in the Connection Point area and service topology.

    • Click Auto-Calculate to obtain connection points for the composite service.
    • Alternatively, manually create connection points as follows:
      1. Choose the desired type of connection points from the Create drop-down list.
      2. In the displayed dialog box, specify Name for the connection points or choose Auto-Name.
      3. Specify Type for the composite service.
      4. Click to select PWs or ports.
      5. Click OK to exit the dialog box.

  6. After completing the setting, click OK.
Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020976

Views: 45638

Downloads: 378

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next