No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Secondary Group of a Local Authentication User

Modifying the Secondary Group of a Local Authentication User

This operation enables you to modify the secondary group of a local authentication user.

Context

The change of the local authentication user or domain user (including the user is disabled or deleted, user password is changed or expires, and the owning group of the user is changed) that access a CIFS/FTP/NFS share takes effect after the user is authenticated again. You can mount the share again to trigger the authentication.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > User Authentication.
  3. Select the local authentication user whose secondary group you want to change.
  4. Click More > Change Secondary Group.

    The Change Secondary Group dialog box is displayed.

  5. Change the secondary group of a local user.

    1. To add a new user group, click Add.

      The Select User Group dialog box is displayed.

    2. Select one user group or multiple user groups that you want to add and click OK.

      To remove a user group, select it and click Remove.

    3. Click OK.

      The Success dialog box is displayed, indicating that the operation succeeded.

    4. Click OK to finish modifying the secondary group of a local authentication user.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 43758

Downloads: 68

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next