No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Storage Pool Information

Viewing Storage Pool Information

This operation enables you to view the information about all the storage pools on a storage system.


At least one File Storage Service type storage pool has been created on the storage system.


  1. Log in to DeviceManager.
  2. Choose Provisioning > Storage Pool.
  3. View storage pool information.

    Table 4-2 describes storage pool parameters.
    Table 4-2 Storage pool parameters





    Name of a storage pool.




    ID of a storage pool.



    Health Status

    Health status of a storage pool.



    Running Status

    Running status of a storage pool.




    Usage of a storage pool. The usages include:

    • Block Storage Service: for creating LUNs.
    • File Storage Service: for creating file systems.


    File Storage Service

    Owning Disk Domain

    Name of the disk domain that a storage pool corresponds to.



    Storage Medium

    Disk types in a storage pool.



    Total Capacity

    Total capacity of a storage pool.


    2.000 TB

    Used Capacity

    Sum of the allocated capacity and data protection capacity in the storage pool, that is, Used Capacity = Allocated Capacity + Data Protection Capacity. The percentage of Used Capacity to Total Capacity is displayed on DeviceManager.


    30.293 GB


    Allocated Capacity

    Capacity actually allocated by a storage pool to file systems


    100.000 MB

    Free Capacity

    Free capacity of a storage pool.


    500 GB

    Data Protection Capacity

    Capacity allocated by a storage pool for data protection.


    30.000 GB

    Migration Triggering Mode

    Mode of data migration among storage tiers in a storage pool.


    This parameter is only applicable to storage pools for Block Storage Service.



    Total Subscribed Capacity

    Sum of the preset capacities of all the file systems in the storage pool.


    46.000 GB (0.15%)

    Capacity Saved by SmartDedupe

    Size of storage space saved by the deduplication of data written to the file system.


    40.959 GB (50%)

    Capacity Saved by SmartCompression

    Size of storage space saved by the compression of data written to the file system.


    40.959 GB (50%)

    Capacity Saved by SmartDedupe and SmartCompression

    Total storage space saved after data written to file systems is deduplicated and compressed.


    81.919 GB (50%)

    • In the information display area, you can click to set the information items to be displayed.
    • GUIs may vary with product versions and models. The actual GUIs prevail.

  4. Select a storage pool, and in the area below, view the file system information.
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 44677

Downloads: 68

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next