No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Properties of a Bond Port

Modifying the Properties of a Bond Port

This section describes how to change the MTU of a bond port.

Prerequisites

A bond port has been created.

Context

The MTU of a SmartIO port must be the same as that of the host.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Bond Ports.
  3. Select the bond port you want to modify and click Properties.
  4. Modify MTU (Byte).
  5. Click OK.

    The security alert dialog box is displayed.

  6. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
  7. Click OK.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 47629

Downloads: 72

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next