No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Parameters of an HTTP Share

Modifying the Parameters of an HTTP Share

This operation enables you to modify the parameters of an HTTP share, including the setting the maximum number of connections and enabling or disabling DAV.


  • You are an administrator or super administrator.
  • An HTTP share directory has been created.


  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > HTTP Service.
  3. Modify HTTP service parameters based on the planned data.

    Table 4-31 HTTP service parameters




    HTTP Service

    Global control over the enable and disable status of the HTTP sharing service. If this parameter is set to disable, all the other parameter configurations become invalid.

    • By default, the storage system provides the HTTPS service certificate. You are advised to replace the certificate with the private certificate before accessing HTTPS shares. After the certificate is replaced, the CA certificate of the storage system must be imported for the browser to eliminate security alarms. As the service IP address is used to access the HTTPS service, alarm This website's address does not match the address in the security certificate cannot be cleared.
    • When the HTTP service is disabled, the system automatically deletes information about shared file systems and directories. When the HTTP service is enabled again, configure the HTTP shared file systems and directories.



    Max. Number of Connections

    Maximum number of HTTP share connections allowed by the system.


    The maximum number of connections varies depending on the device model. For details, see the Software Specifications of the corresponding model and version in the product description.

    [Value range]

    1 to 256

    HTTP Default Port

    Only the HTTPS port is enabled for the storage system when the HTTP service is enabled. To enable the HTTP port, select Enable.


    Exercise caution when enabling the HTTP port.



    File System

    File system that you want to share over HTTP.



    Directory that you want to share over HTTP.


    Share Path

    Path that you want to share over HTTP. This parameter consists of File System and Directory.




    DAV, also known as WebDAV (Web-based Distributed Authoring and Versioning), is a communication protocol based on HTTP. Once WebDAV enabled, the system allows the DAV client to read/write the shared directory, and supports file locking, file unlocking, and file version control.



  4. Click Save.
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 45144

Downloads: 71

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next