No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing a Bond Port

Viewing a Bond Port

This section describes how to view the ID, name, MTU, and the number of ports bonded to the bond port.

Prerequisites

A bond port has been created.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Bond Ports.
  3. View bond port information. The parameters are described in Table 4-6.

    Table 4-6 Bond port parameters

    Parameter

    Description

    ID

    ID of the bond port.

    Name

    Name of the bond port.

    Health status

    Health status of the bond port.

    Running status

    Running status of the bond port.

    MTU

    MTU of the bond port.

    Number of ports

    Number of Ethernet ports bonded into the bond port.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 47667

Downloads: 72

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next