No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the IP Address Floating Policy?

What Is the IP Address Floating Policy?

When a storage system is initialized, it automatically adds all Ethernet ports and bond ports to the default floating group. The priority of controllers for IP address floating is given to a port (at the same location) on the peer controller, then to a port (at another location) on the peer controller, and finally to a port on the current controller in the cluster. IP addresses can float between various interface modules. The port for the IP address floating policy is determined by the port location instead of the port rate.

Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 47241

Downloads: 72

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next