No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2600 V3 Video Surveillance Edition V300R006 Basic Storage Service Configuration Guide for File

This document is applicable to OceanStor OceanStor 2600 V3 Video Surveillance Edition. This document describes the basic storage services and explains how to configure and manage basic storage services for storage system.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Disk Domain

Creating a Disk Domain

Storage systems provide storage space based on disk domains. When creating a disk domain, specify the disk type and quantity.


  • You are advised to use different disk domains to create storage pools for the block storage service and file storage service.
  • To prevent data loss or performance deterioration caused by a member disk failure, a storage system uses hot spare space to take over data from the failed member disk. For details about how to plan hot spare policies for a disk domain, see "Planning Disk Domains".


  1. Log in to DeviceManager.
  2. Choose Provisioning > Disk Domain.
  3. Click Create.

    The Create Disk Domain dialog box is displayed.

  4. Specify Name and Description for the disk domain.

    The descriptive information, such as the function and properties of the disk domain, helps identify the disk domain.

  5. Select the disks that comprise the disk domain. There are three ways to select the disks:

    • Select All available disks.

      You only need to configure the hot spare policy for the storage tier.

    • Select Specify disk type.
      1. Select the storage tier according to the disk type.
      2. Configure the number of disks for each storage tier.
      3. Configure the hot spare policy for each storage tier.
    • Select Manually select.
      1. Click Select.
      2. In the Select Disk dialog box, select the disks you need and click .
      3. Click OK to finish selecting disks.
      4. Configure the hot spare policy for each storage tier.

  6. Click OK.

    A message is displayed, indicating that the operation succeeded.

  7. Click OK.
Updated: 2019-07-12

Document ID: EDOC1100021203

Views: 43210

Downloads: 68

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next