No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the PowerCube 500 in terms of its commissioning and configuration, To be more specific, this document describes the basic NE configurations, Ethernet services configurations, and creating SEP protection.

The figures provided in this document are for reference only.

Related Versions

The following table lists the product versions related to this document.

PowerCube 500

eSight

V200R001C20

V300R010C00

V200R001C10

V300R009C00

Intended Audience

This document is intended for:

  • Installation and commissioning engineer
  • Data configuration engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Updates in Issue 04 (2019-04-30) Based on Product Version V200.

This is the fourth document issue. Compared with 03, Issue 04 includes the following updates:

  • Add synchronizing NE time.
  • Add setting ethernet port parameters.

Updates in Issue 03 (2019-01-31) Based on Product Version V200.

This is the third document issue. Compared with 02, Issue 03 includes the following updates:

  • Add modifying NE IP addresses.

Updates in Issue 02 (2018-09-10) Based on Product Version V200.

Compared with V200R001C10, V200R001C20 has the following updates:

  • New support for EG6P-150G1 device configuration.
  • Add configuration ERPS, configuration LAG.

Updates in Issue 01 (2018-05-20) Based on Product Version V200

This issue is the first release for the product version V200R001C10.

Translation
Download
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 13804

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next