No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Virtual Channel VLAN Forwarding Table

Creating a Virtual Channel VLAN Forwarding Table

You need to create a virtual channel VLAN forwarding table on an interconnection node.


  • You must be an NM user with NE operator authority or higher.
  • The Ethernet ring protection instance must be created.

Tools, Equipment, and Materials

Web-based NMS.

Background Information

  • A virtual channel VLAN forwarding table needs to be created only for sub-rings. The sub-rings need to be associated with corresponding major rings.
  • Virtual Channel Status must have been enabled and Virtual Channel VLANs must have been correctly set for the major ring by Setting Protocol Parameters for an ERPS Instance.


  1. Choose Configuration > Ethernet Protection > ERPS Management.
  2. Select the sub-ring.
  3. Click Virtual Channel VLAN Forwarding Table.
    The Virtual Channel VLAN Forwarding Table dialog box is displayed.
  4. Click New.
    The Create Virtual Channel VLAN Forwarding Table dialog box is displayed.
  5. Configure the parameters for the virtual channel VLAN forwarding table.

    • The system automatically displays the ID of the sub-ring ERPS instance and the ERPS ID of the major ring with which the sub-ring ERPS instance is associated.
    • Set Virtual Channel VLAN to the control VLAN ID of the sub-ring R-APS virtual channel.
    • Set Virtual Channel VLAN on Major Ring to the Virtual Channel VLANs of the associated major ring node.

  6. Click OK.
  7. Click Close.
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 21672

Downloads: 242

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next