No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring a Network

Monitoring a Network

This section provides hyperlinks to operations of monitoring a network.

  • All the operations mentioned in this section are completed on the PowerCube 500 NE.
  • The eSight is embedded with the link to the Web-based NMS system. Except topology management and query of basic NE information, other configuration operations on the eSight are completed by jumping to the Web-based built-in NMS system of the NE. Therefore, the configuration operations supported by the Web-based NMS system are also applicable to the eSight. The operation modes are the same.
  • The Web LCT and U2000 have similar operation modes.
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 22723

Downloads: 250

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next