No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Layer 2 Attributes of Ethernet Ports

Setting the Layer 2 Attributes of Ethernet Ports

Ethernet port Layer 2 attributes define link-layer information.

Prerequisites

You have logged in to the NE.

Tool

Web-based NMS (Internet Explorer 9.0 or later)

Procedure

  1. Set Ethernet port Layer 2 attributes.

    NOTE:

    When Encapsulation Type in the Basic Attributes tab page is set to QinQ, you need to set QinQ Type Domain. The default value is 88A8.

    When Encapsulation Type in the Basic Attributes tab page is set to Null or 802.1Q, you cannot set QinQ Type Domain. In this case, QinQ Type Domain is displayed as FFFF and cannot be changed.

    You can set Tag to specify the type of data packets to be processed.

    • Tag Aware: The port transparently transmits the packet with a VLAN ID (tagged). If a packet does not have a VLAN ID (untagged), the port discards this packet. In this case, Default VLAN ID and VLAN Priority are meaningless.
    • Access: The port adds the default VLAN ID to the packet without any VLAN ID (untagged). If the packet has a VLAN ID (tagged), the port discards this packet.
    • Hybrid: The port adds the default VLAN ID to the packet without any VLAN ID (untagged). If the packet has a VLAN ID (tagged), the port transparently transmits the packet.
Translation
Download
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 22707

Downloads: 250

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next