No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Manually Modifying NE IP Addresses

Manually Modifying NE IP Addresses

When DHCP is not enabled, you can manually modify NE IP addresses one by one according to the planning file.


  • You have logged in to the NE.
  • The DHCP client is not enabled on the NE.


Web-based NMS (Internet Explorer 9.0 or later)


  1. Check that the DHCP client is not enabled on the NE.

  2. Modify NE IP addresses according to the planning file.

    After the IP address of an NE is modified, re-login to the NE is required.

Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 22900

Downloads: 250

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next