No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Port Blocking Mode

Configuring the Port Blocking Mode

This topic describes how to configure the blocking mode for a port.


  • You must be an NM user with NE operator authority or higher.

  • SEP Protection Instance has been created.

Tools, Equipment, and Materials

Web-based NMS.


  1. Choose Configuration > Sep Management.
  2. Choose the SEP protection instance, Click the Blocking Mode tab and set the priority of the port blocking mode.
  3. Click Apply.

Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 21215

Downloads: 238

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next