No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Advanced Attributes of Ethernet Ports

Setting the Advanced Attributes of Ethernet Ports

You can configure MAC/PHY layer loopbacks, check the port rates, and configure loopback detection and broadcast packet suppression functions by setting related Ethernet advanced attributes.

Prerequisites

You have logged in to the NE.

Tool

Web-based NMS (Internet Explorer 9.0 or later)

Procedure

  1. Set Ethernet port advanced attributes.

Translation
Download
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 25674

Downloads: 280

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next