No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Protocol Parameters for an ERPS Instance

Setting Protocol Parameters for an ERPS Instance

Protocol parameters set for an ERPS instance take effect only to the ERPS instance.


  • You must be an NM user with NE operator authority or higher.
  • The Ethernet ring protection instance must be created.

Tools, Equipment, and Materials

Web-based NMS.


  1. Choose Configuration > Ethernet Protection > ERPS Management from the Function Tree.
  2. Set the parameters for the ERPS instance.
  3. Click Apply.


    In this step, you can set Compatible_Version, Virtual Channel Status, Virtual Channel VLANs, and Major ERPS Ring ID, and query or modify other ERPS instance protocol parameters. Set Major ERPS Ring ID only for the sub-ring ERPS instance on an interconnection node to associate the sub-ring ERPS instance with the major ring ERPS instance.

Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 21435

Downloads: 238

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next