No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

PowerCube 500 System Configuration Guide (PC500-300H1, PC500-300G1, EG6P-150G1)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating Ethernet Ring Protection Instances

Creating Ethernet Ring Protection Instances

Ethernet ring protection switching (ERPS) is configured through creation of Ethernet ring protection instances.

Prerequisites

You must be an NM user with NE operator authority or higher.

Tools, Equipment, and Materials

Web-based NMS.

Procedure

  1. Choose Configuration > Ethernet Protection > ERPS Management from the Function Tree.
  2. Click New.
    The Create Ethernet Ring Protection Protocol Instance dialog box is displayed.
  3. Set the parameters for the Ethernet ring protection instance.
  4. Click Apply.



Translation
Download
Updated: 2019-04-26

Document ID: EDOC1100021621

Views: 21599

Downloads: 241

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next