No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 O&M Guidelines 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document provides maintenance instructions to help technical support engineers and maintenance engineers to perform O&M operations for FusionAccess in FusionCloud V100R006C10.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

Notice that does not contain a safety warning sign does not involve personal injury.

Calls attention to important information, best practices, and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

07

2019-05-08

This issue is the seventh official release.

Modified the following contents:

Optimized the description about Service access gateway configuration in Enabling Internet Access.

06

2019-04-30

This issue is the sixth official release.

Modified the following contents:

Optimized the description about ELB connectivity check in Enabling Internet Access.

05

2019-02-18

This issue is the fifth official release.

Modified the following contents:

The version number of the software package is updated. The following sections are involved:

04

2019-01-15

This issue is the fourth official release.

Modified the following contents:

Delete the KB2958122 patch from the OS patch in Configuring the OS.

03

2018-11-27

This issue is the third official release.

Added the following contents:

02

2018-08-30

This issue is the second official release.

Added the following contents:

Modified the following content:

  • Added the operating scenarios, and optimized the prerequisites and procedures of Applying for the vAG ECSs, Adding firewall rules, and Configuring ELB in Capacity Expansion for AG.
  • Deleted the capacity adjustment scenarios described in Capacity Adjustment.

Deleted the following content:

Deleted the section Capacity Expansion for WI/vAG.

01

2018-05-10

This is the first official release.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100021783

Views: 7175

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next