No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Windows OS

Installing a Windows OS

Scenarios

This section describes how to install a Windows OS on a VM.

The installation procedure varies depending on the image file you use. Operate as prompted.

Preparations

Prerequisites

You have logged in to the VM and switched to the installation window.

Data

Key data and parameters required for this task are described in the specific procedures.

The password must conform to the following rules:
  • Contains at least one uppercase letter (A to Z), one lowercase letter (a to z), one digit (0 to 9), and one space or special character (~!@#$%^&*()-_=+\|{};:'",<.>/?).
  • Contains 8 to 32 characters.
  • Cannot be the same as the recent three passwords.
  • Cannot contain the username or reversed username.

Procedure

Determining the type of the OS to be installed

  1. Perform operations depending on the OS type of an image file.

    Do not shut down the ISO VM before the OS installation is complete. Otherwise, the OS will not be installed successfully.

    • To install Windows 7, go to Step 2.
    • To install Windows 10, go to Step 14.
    • To install Windows Server 2008 R2, go to Step 23.
    • To install Windows Server 2012 R2, go to Step 30.
    • To install Windows Server 2016, go to Step 39.

Installing the Windows 7 OS

NOTE:

The following operations use Windows 7 Professional Edition as an example. Detailed steps may vary depending on the release time and language of OS ISO files.

  1. On the Windows 7 OS installation page, specify Language to install, Time and currency format, and Keyboard or input method, and click Next.
  1. Click Install now.

    The Please read the license terms dialog box is displayed.

  2. Select I accept the license terms and click Next.

    The page for selecting the OS type is displayed.

  3. Click Custom(Advanced).

    The disk installation window is displayed.

  4. Retain the default disk.
  5. Click Next.

    The OS installation starts. The VM restarts several times during the installation process. Each time after the VM restarts, log in to the VM using VNC. The installation process takes about 30 minutes.

    After the installation is complete, a dialog box is displayed asking you to set a username.

  6. Set Type a user name to LocalAccount and click Next.

    The Set a password for your account window is displayed.

  7. Set Type a password and Type a password hint, and click Next.

    The Type your Windows product key window is displayed.

  8. Enter Windows product key and click Next.

    The Help protect your computer and improve Windows automatically window is displayed.

  9. Select Use recommended settings.

    The Review your time and date settings window is displayed.

  10. Set Time zone, Date, and Time, and click Next.

    The Select your computer's location window is displayed.

  11. Click Work network.

    The system automatically completes OS installation and configuration based on configuration information and uses the LocalAccount account to log in to the ISO VM OS.

    No further action is required.

Installing the Windows 10 OS

NOTE:
  • The following operations use Windows 10 Professional Edition as an example. Detailed steps may vary depending on the release time and language of OS ISO files.
  • After mounting the ISO file of Windows 10, you need to wait for about 40 minutes before the Windows 10 OS installation window is displayed.
  1. On the Windows 10 OS installation page, specify Language to install, Time and currency format, and Keyboard or input method, and click Next.
  1. Click Install now.

    The Type your Windows product key window is displayed.

  2. Enter Windows product key and click Next.

    NOTE:

    Obtain the SN of Windows 10 from Microsoft, Huawei, or other legal sources.

  3. In the displayed License terms dialog box, select I accept the license terms and click Next.

    The page for selecting the OS type is displayed.

  4. Click Custom: Install Windows only (advanced).

    The disk installation window is displayed.

  5. Retain the default disk.
  6. Click Next.

    The OS installation starts and the entire installation process takes about 30 minutes.

    After the installation is complete, the Get going fast page is displayed.

  7. Click Use Express settings.

    The Create an account for this PC page is displayed.

  8. Set Who's going to use this PC? to LocalAccount, enter Password and Password hint, and click Next.

    The system automatically completes OS installation and configuration based on configuration information and uses the LocalAccount account to log in to the ISO VM OS.

    No further action is required.

Installing the Windows Server 2008 R2 OS

NOTE:

The following operations use Windows Server 2008 R2 Standard Edition as an example. Detailed steps may vary depending on the release time and language of OS ISO files.

  1. On the Windows Server 2008 R2 OS installation page, specify Language to install, Time and currency format, and Keyboard or input method, and click Next.
  1. Click Install now.
  2. Select Windows Server 2008 R2 Standard (Full Installation), and click Next.
  3. Select I accept the license terms and click Next.
  4. Click Custom(Advanced).
  5. Click Next.

    The OS installation starts and the entire installation process takes about 50 minutes.

  6. After the installation, set a password for the Administrator account as prompted and log in to the VM using the Administrator account.

    No further action is required.

Installing the Windows Server 2012 R2 OS

NOTE:

The following operations use Windows Server 2012 R2 Standard Edition as an example. Detailed steps may vary depending on the release time and language of OS ISO files.

  1. On the Windows Server 2012 R2 OS installation page, specify Language to install, Time and currency format, and Keyboard or input method, and click Next.
  1. Click Install now.

    The Type your Windows product key window is displayed.

  2. Enter Windows product key and click Next.
  3. During the installation, select Windows Server 2012 R2 Standard Evaluation (Server with a GUI), and click Next.
  4. In the displayed License terms dialog box, select I accept the license terms and click Next.

    The page for selecting the OS type is displayed.

  5. Click Custom: Install Windows only (advanced).

    The disk installation window is displayed.

  6. Retain the default disk.
  7. Click Next.

    The OS installation starts and the entire installation process takes about 30 minutes.

  8. After the installation, set a password for the Administrator account as prompted and log in to the VM using the Administrator account.

    No further action is required.

Installing the Windows Server 2016 OS

NOTE:

The following operations use Windows Server 2016 (Build 14393) as an example. Detailed steps may vary depending on the release time and language of OS ISO files.

  1. On the Windows Server 2016 OS installation page, specify Language to install, Time and currency format, and Keyboard or input method, and click Next.
  2. Click Install now.
  3. Enter the valid Windows product key and click Next.

    If you do not have a product key, click I don't have a product key.

  4. Select Windows Server 2016 Standard(Desktop Experience), and click Next.
  5. Accept the license agreement and click Next.
  6. Click Custom: Install Windows only (advanced).
  7. Retain the default disk.
  8. Click Next.

    The OS installation starts and the entire installation process takes about 30 minutes.

  9. After the installation, set a password for the Administrator account as prompted, click Finish.
Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 45719

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next