No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Backup Server

Creating a Backup Server

Scenarios

This section describes how to create a Backup Server on the cascading FusionSphere OpenStack management console (Region Type I scenario) or FusionSphere OpenStack management console (Region Type II scenario).

Prerequisites

  • You have obtained the FusionAccess_Euler_Installer_V100R006C20SPC103.iso file.
  • You have logged in to the cascading FusionSphere OpenStack management console (Region Type I scenario) or FusionSphere OpenStack management console (Region Type II scenario).

Procedure

Registering an image

  1. On the FusionSphere OpenStack management console, choose Resources > Computing > Images, and click Register.
  2. Set the parameters according to Table 4-19. Retain the default values for the parameters that are not involved, and then click OK.

    Table 4-19 Image parameters

    Parameter

    Description

    Provided As Service

    Supported

    Type

    KVM

    Name

    FusionAccess_Euler_Image

    Applicable OS

    Linux

    OS Version

    EulerOS 2.2 64-bit

    Min Disk (GB)

    60

    Min Memory (MB)

    4096

    Disk Device Type

    virtio

    Image Server Type

    Glance

    Upload Mode

    HTTPS

    Image File

    FusionAccess_Euler_Installer_V100R006C20SPC103.iso

  3. Refresh the image list after the registration. When the newly registered image is displayed, the registration is successful.

Creating a VM

  1. Choose Resources > Computing > Compute Instances and click Create.
  2. Set Availability Zones to the availability zone (AZ) of the interconnected back-end storage, for example, manage-az, and click Next.
  3. Select the image registered in Step 3 and click Next.
  4. Select the image registered in Creating a Linux VM. Set the storage type of the system disk to Cloud Disk and click Next.
  5. Select the vdi-backupserver flavor created in Defining Computing Instance Flavors (KVM) and click Next.
  6. Select the DMZ_Service and DMZ_Tenant network and click Next, as shown in Figure 4-59.

    Figure 4-59 Selecting a network

  1. In the window that is displayed, set VM Name to FA-Pub-Backup and click Next.

    NOTE:
    • If you do not add the VMTools role to all hosts in the AZ in Obtaining UVP VMTools, select the hosts where the VMTools role is deployed.
    • If the VMTools role has been added to all hosts in the AZ, this option is not selected by default.

  2. Confirm the VM information and click Complete to start VM creation.
  3. Choose System > Tasks and Logs > Task Center to check the VM creation progress.

    When the status becomes Succeeded, the VM is successfully created.

  4. After the VM is created, choose Resources > Computing > Compute Instances to record the VM IP address.
Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 48233

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next