No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a License Server

Creating a License Server

Scenarios

This section describes how to create a public License Server on the cascading FusionSphere OpenStack management console (Region Type I scenario) or FusionSphere OpenStack management console (Region Type II scenario). This is used to deploy public licenses and cascading ITAs.

Prerequisites

You have logged in to the cascading FusionSphere OpenStack management console (Region Type I scenario) or FusionSphere OpenStack management console (Region Type II scenario).

Procedure

  1. On the FusionSphere OpenStack management console, choose Resources > Computing > Compute Instances and click Create.
  2. Set Availability Zones to the availability zone (AZ) of the interconnected back-end storage, for example, manage-az, and click Next.
  3. Select the image registered in Step 3 in Creating a Backup Server and click Next.
  4. Select the vdi-license flavor created in Defining Computing Instance Flavors (KVM) and click Next.
  5. Select the DMZ_Service and DMZ_Tenant network and click Next, as shown in Figure 4-63.

    Figure 4-63 Selecting a network

  1. In the window that is displayed, set VM Name to FA-Pub-License and click Next.

    NOTE:
    • If you do not add the VMTools role to all hosts in the AZ in Obtaining UVP VMTools, select the hosts where the VMTools role is deployed.
    • If the VMTools role has been added to all hosts in the AZ, this option is not selected by default.

  2. Confirm the VM information and click Complete to start VM creation.
  3. Choose System > Tasks and Logs > Task Center to check the VM creation progress.

    When the status becomes Succeeded, the VM is successfully created.

  4. After the VM is created, choose Resources > Computing > Compute Instances to record the VM IP address.

    NOTE:

    After the VM is created, two IP addresses are generated for the DMZ_Service and DMZ_Tenant planes.

Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 46262

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next