No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


When using AutoInstall to automate the deployment, you have the following constraints:

  • AutoInstall must be run on the FusionAccess V100R006C20SPC100 and later versions of the Euler OS. You are advised to deploy the public license components and AutoInstall on the same server.
  • Only one FusionAccess system can be provisioned in the same VPC.
  • If FusionAccess is deployed in different VPCs of the same tenant, both the VPC names and the subnet names in the VPC must be unique.
  • If FusionAccess is deployed in a network that has been associated with a virtual firewall, the firewall rules with higher priorities are automatically inserted during the automated deployment to ensure that FusionAccess runs properly.
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47507

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next