No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Backup Server

Configuring the Backup Server

Scenarios

This section describes how to install an OS on a bare VM.

Prerequisites

You have logged in to the cascading FusionSphere OpenStack management console (Region Type I scenario) or FusionSphere OpenStack management console (Region Type II scenario).

Procedure

Logging in to the VM using VNC

  1. On the FusionSphere OpenStack management console, choose Resources > Computing > Compute Instances. In the row of the newly created VM, choose More > VNC Login.

    NOTE:

    If the wait time for the VM system startup options is too short after you log in to the VM, you may fail to enter the system installation options in a timely manner. In this case, forcibly restart the VM and use VNC to rapidly log in to the VM. In the row of the newly created VM, choose More > Force Restart.

Installing an OS on the VM

  1. After the VM is successfully restarted, the Welcome to UVP! page is displayed. Select Install within 30 seconds and press Enter.

    NOTE:

    If you do not select Install within 30 seconds, the system boots from the local hard disk by default.

    The system starts automatic loading. The loading takes about 3 minutes. After the loading is complete, the Main Installation Window page is displayed, as shown in the following figure.

    NOTE:
    • Press Tab or and to move the cursor.
    • Press Enter to select an item or execute the selected item.
    • Press the space key to select the item selected by the cursor.
    • Use the digital keys in the upper part of the main keyboard area to enter digits.

  2. In the navigation tree on the left, select Network and press Enter.
  3. In the Network window, set the NIC type of eth0 and eth1 to dhcp.
  4. Set the value of Default Gateway to DMZ_Service gateway.
  5. In the navigation tree, select Hostname and press Enter.
  6. In the Hostname Configuration window, change the value of HostName to FA-Pub-Backup and save the settings.
  7. In the navigation tree, select Timezone and press Enter.
  8. In the Time Zone Selection window, change the time zone and time and save the settings.
  9. In the navigation tree, select Password and press Enter.
  10. On the Root Password Configuration page, enter the password of user root as planned and save the settings.
  11. Press F12. A confirmation dialog box is displayed. Press Enter as prompted.

    The Package Installation page is displayed. Linux OS installation starts.

  12. After the OS is successfully installed, the VM automatically restarts.

    NOTE:
    • The installation takes about 10 minutes.
    • During the VM restart process, if Failed is displayed for certain items, ignore these items and continue with subsequent operations. These items do not affect the normal use of the VM.

Installing Driver Tools

  1. On the FusionSphere OpenStack management console, choose Resources > Computing > Compute Instances.
  2. Locate the row containing the target VM and select Stop from the More drop-down list.
  3. After the VM is stopped, choose More > Attach uvptools. After the mounting is successful, click Start.
  4. Log in to the VM using VNC as user root.

    Username: root; default password: Use the actual value set in Step 11.

    NOTE:
    • If this is the first time for user root to log in to the VM, the FusionAccess screen is displayed.
    • Press and to move the cursor upwards and downwards.

  5. Move the cursor to Driver Tools in the navigation on the left, and press Enter.
  6. Install Driver Tools as prompted and press F8 to restart the VM.
  7. On the FusionSphere OpenStack management console, locate the row containing the target VM and select Detach uvptools from the More drop-down list.
Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47593

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next