No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Security Group and Virtual Firewall on the ITA Node

Modifying the Security Group and Virtual Firewall on the ITA Node

Scenarios

This section describes how to modify the security group and virtual firewall configurations of the ITA node on ManageOne.

Prerequisites

You have obtained the account and password for logging in to ManageOne.

Procedure

  1. Log in to the ManageOne operation plane, choose Network > Virtual Private Cloud > Security Group, and find the security group of the ITA node.
  2. Add a rule as follows:

    • Protocal: TCP
    • Transfer Direction: Inbound
    • Port Range: 8773
    • Set Source to IP Address and enter the IP address of the DMZ_Tenant network segment of FusionManager.

  1. Add a rule according to the following configuration.

    • Protocal: TCP
    • Transfer Direction: Inbound
    • Port Range: 8081
    • Set Source to IP Address and enter the IP address of the DMZ_Tenant network segment of FusionManager.

  2. Choose Network > Virtual Private Cloud > Virtual Firewall to find the virtual firewall of the ITA node.
  3. Add a rule before a record according to the following configuration:

    • Action: Permit
    • Protocal: TCP
    • Source: IP address of the DMZ_Tenant network segment of FusionManager.
    • Source Port Range: 0
    • Destination: ITA management subnet segment.
    • Destination Port Range: 8773

  1. Add a rule before a record according to the following configuration:

    • Action: Permit
    • Protocal: TCP
    • Source: IP address of the DMZ_Tenant network segment of FusionManager.
    • Source Port Range: 0
    • Destination: ITA management subnet segment.
    • Destination Port Range: 8081

Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47679

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next