No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Time

Configuring Time


This section describes how to configure the time zone and time synchronization on FusionAccess cascaded on the ITA component.


You have logged in to the current tenant's FusionAccess management system.


Configuring the FusionAccess time zone

  1. On the FusionAccess page of the current tenant, choose System > Time Management > Time Zone.

    The Time Zone page is displayed.

  2. Configure the time zone.
  3. Determine whether to select Support DST based on site requirements and set DST rules.
  4. Click OK.

Configuring FusionAccess time synchronization

  1. On the FusionAccess page of the current tenant, choose System > Time Management > Time Synchronization.

    The Time Synchronization page is displayed.

  2. In the Upper-layer clock source area, configure the clock source IP address or domain name.

    For example, set Clock source IP or domain name to the IP address of AD.

  3. Click to configure another clock source IP address or domain name.
  4. Click OK.
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47533

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next