No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deploying the APS Server

Deploying the APS Server

Scenarios

This section describes how to deploy the APS server.

Procedure

  1. On the ServiceCenter tenant portal, choose Computing > Elastic Cloud Server and click Create ECS.
  2. Set the parameters according to Table 8-4. Retain the default values for the parameters that are not involved or set the parameters according to the actual requirements. Click Apply Now.

    Table 8-4 FA-APS-01 parameter configuration

    Parameter

    Description

    ECS Name

    FA-APS-01

    vCPU

    8

    Memory

    16 GB

    Image Type

    Public image

    Image

    Configure this parameter based on resource requirements.

    Disk

    60 GB

    VPC

    vpc-VDI

    Security Group

    sg-desktop

    NIC

    Configure a static IP address for the service subnet (subnet-Desktop), for example, 192.168.0.19.

    EIP

    Select Do Not Use.

    Login Mode

    Click Password and enter the password of Administrator.

Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 47562

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next