No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting Applications

Adjusting Applications

Scenarios

This section describes how to adjust applications.

Prerequisites

  • You have logged in to FusionAccess.
  • VMs in a VM group have been assigned to users.
  • Published applications exist in the application group.

Data

Table 8-8 describes the data required for performing this operation.

Table 8-8 Data required for performing this operation

Type

Parameter

Description

Example Value

Application authorization parameters

Domain name

Specifies the domain to which the user or user group to be added belongs.

vdesktop.huawei.com

User(Group) name

  • Identifies an application. The application name is a string of 1 to 55 characters consisting of digits, letters, spaces, and special characters ~!@%^_+-. It cannot start with any of the following characters: !@%^.
    NOTE:

    The application name cannot consist of only digits. You are advised to set the application name to a combination of digits and letters.

  • An existing application group name cannot be reused.

User01

Procedure

Adding APS servers

  1. On FusionAccess, choose Desktop > VM Group.
  2. Select a VM group and click Add VM.

    The Add VM page is displayed.

  3. Select the host to which the VM belongs from the Host drop-down list.
  4. Click Select next to VM template. In the displayed dialog box, select the created APS server template and click OK.
  5. Use the parameter values in the template or reconfigure the following parameters based on actual requirements.

    • CPU
    • Memory (MB)
    NOTE:

    The preceding parameters are automatically associated with the parameter values set in the template. Configure the parameters as required.

  6. Configure other information about the VM based on the data plan.

    NOTE:

    Configure Local domain and OU name for the APS server in System in advance.

  7. Click Finish.

    A dialog box is displayed.

  8. Click OK.

    The system displays a message indicating that the APS servers are added successfully.

  9. Click Return to VM Group.

    The VM group management page is displayed. You can view information about the created APS servers in the VM group list.

  10. On FusionAccess, choose Desktop > Application Group.
  11. In the application group list, select the application group to which the APS servers are added, and click .
  12. Configure the parameters of the APS servers based on Table 8-9.

    Table 8-9 Data required for performing this operation

    Parameter

    Description

    Example Value

    VM naming (rule)

    A VM name consists of a prefix and a number sign (#). The prefix contains uppercase letters (A to Z), lowercase letters (a to z), digits (0 to 9), and hyphens (-) but cannot contain only digits. The prefix length cannot exceed 15 characters.

    Fast#

    VM Group

    Select a hosting computer group for this parameter.

    ResourceGroup_01

  13. In the VM list, select APS servers to be added and click Confirm.

Removing APS servers

  1. On the FusionAccess portal, choose Desktop > Application Group.

    The user group management page is displayed.

  2. Select the application group to which APS servers belong and click Remove VM.
  3. In the displayed list, select APS servers to be removed and click Confirm.
  4. No further action is required.

Adding or updating applications

  1. Install or update application software on the APS server.

    Table 8-10 describes the process for installing or updating application software.

    Table 8-10 Installing or updating application software

    Procedure

    Description

    Log in to the APS server.

    Log in to the APS server using a domain account. You can log in to the APS server using VNC or mstsc on FusionCompute.

    Install or upgrade an application.

    Copy the software of the application to be installed or updated to the APS server and install the software. When multiple APS servers exist, install the software on all APS servers.

    Publish the application again.

    Publish the application again on FusionAccess. For details, see Publishing Applications.

    Access the application.

    Access the application using an SC, TC, or iOS or Android terminal.

  2. Create a template and publish applications using the new template.

    Table 8-11 describes the process for creating a template and publishing applications using the new template.

    Table 8-11 Creating a template and publishing applications using the new template

    Procedure

    Description

    Deploy an APS server.

    Create an APS server by creating a bare VM and configure the APS server. For details, see Deploying the APS Server.

    Publish the application again.

    Publish the application again on FusionAccess. For details, see Publishing Applications.

    Access the application.

    Access the application using an SC, TC, or iOS or Android terminal.

Adding application authorization

  1. On FusionAccess, choose Desktop.
  2. In the navigation pane, click the application group to be modified under Application Group.
  3. In the application list, select one or multiple applications to be authorized, and click Add Authorization.

    The Add User page is displayed.

  4. Set the following parameters based on the data plan and click Finish.

    • Domain name
    • User(Group) name

  5. Click Save.

    The system displays a message indicating that the user or user group is added successfully.

Modifying application attributes

  1. On FusionAccess, choose Desktop.
  2. In the navigation pane, click the application group to be modified under Application Group.
  3. In the application list, select the application to be modified and click Edit.

    The Edit Application page is displayed.

  4. Modify the following parameters based on the actual situation, and click Save.

    • Application name
    • Executable
    • (Optional) Version
    • (Optional) Publish by
    • (Optional) Command Parameter
    • (Optional) Work Directory
    • (Optional) Application Category
    • (Optional) Description

  5. Click Save.

    The system displays a message indicating that the application information is modified successfully.

Disabling or enabling an application

  1. On FusionAccess, choose Desktop.
  2. In the navigation pane, click the application group to which the application to be disabled or enabled belongs under Application Group.
  3. In the application list, select an application and disable or enable it as required.

    • To disable the application, click Disable.
    • To enable the application, click Enable.

    The system displays a message indicating that the application is disabled or enabled successfully.

Translation
Download
Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 49587

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next