No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionAccess V100R006C20 on FusionCloud V100R006C10 Software Installation Guide 11 (Microsoft AD)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Desktop Management

Configuring Desktop Management


This section describes how to create a VM group and desktop group on FusionAccess of the cascaded ITA.


You have logged in to the current tenant's FusionAccess management system.


  1. On the FusionAccess page of the current tenant, choose Desktop > VM Group to create a VM group, select VDI for Service type and Hosting Computer for VM group type, as shown in Figure 5-46.

    Figure 5-46 Creating a VM group

  2. Choose Desktop > Desktop Group to create a desktop group, select Private for Desktop group type and Hosting Computer for VM type, as shown in Figure 5-47.

    Figure 5-47 Creating a desktop group

Updated: 2019-07-01

Document ID: EDOC1100021785

Views: 48089

Downloads: 104

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next